No products in the cart.
-
- The plug-in module converts any I-Core controller to a 2-wire decoder system (up to 48 stations maximum)
- The DUAL48M decoder output module includes its user interface, just for decoder functions
- The Dual module can also co-exist with conventional ICM-600 station modules
- The Dual decoder module easily plugs into the I-Core controller converting it to 2-wire/decoder control.
Hunter DUAL-48M Decoder Output Module for I-Core Controllers, up to 48 Stations (DUAL48M)
$550.00 /each$550.00 /eachAdd to cart -
- 50-station capacity standard without the need for expansion modules
- Compatible with standard direct burial irrigation wire and standard irrigation wire connectors
- Decoder Auto-Address to detect and assign decoder addresses to stations automatically
- Supports up to two 2-wire paths
- Diagnostic LEDs on the backplane and each 2W-1 Decoder for advanced troubleshooting
- Upgradeable for WiFi-based remote monitoring and control via iOS and Android mobile devices (with LNK2 WiFi Module sold separately)
Rain Bird ESP-2WIRE Two-Wire 50 Station Controller Capacity, Wall Mount Plastic, F55480 (ESP-2WIRE)
$439.00 /each$439.00 /eachAdd to cart -
Flow biCoders™ ensure compatibility between virtually any third-party flow device and any Baseline controller, so retrofitting an existing site to a Baseline system is easy. Baseline controllers are equipped with powerful flow management and monitoring software to quickly react to high and low flow situations, isolate faulty zones, and protect your site from unexpected flow problems.BaseLine BL-5308 Standard Flow Sensor Meter Bicoder (BL-5308)
$429.99 /each$429.99 /eachAdd to cart -
IVM-SEN • Interfaces with LX-IVM to control weather sensors or flow sensorsRain Bird LXIVMSEN IVM-SEN 2-Wire Sensor Device (F47110)
$428.88 /each$428.88 /eachAdd to cart -
• Decoder station sizes available: 1, 2, 4, 6 Max distance to decoder,14 AWG wire path: 10,000 ft. Sensor decoder available with Flow and Click inputs • Max distance to decoder, 12 AWG wire path: 15,000 ft. Max recommended distance, decoder to solenoid: 150 ft. Field programmable decoders • ICD-HP wireless handheld programmer compatible Two-way communications Surge suppression: Internal (ground wire included) • Dual pump/master valve outputs may be assigned to decoders Wire path connectors included with each decoder Number of wire paths: 6 • Automatic daily weather-based scheduling with optional Hunter Solar Sync sensorHunter ICD-600 6 Station Decoder Module for ACC/ACC2 (ICD600)
$397.00 /each$397.00 /eachAdd to cart -
- All bi-coders are fully sealed, submersion-proof, and approved for direct bury
- Shock resistant
- Freeze/heat resistant -4 to 140 degrees F
- Manufactured with 24 inches of 16 ga PVC jacketed solid core wire to connect to the two-wire and 24-inch of 18 ga PVC jacketed stranded core wire to connect to the valve wire
- Includes a built-in amperage meter that accurately measures and diagnoses valve solenoid electrical problems such as: "no current," "station short," or "over current"
- Multi-station bi-coders have color-coded wires for each station
- All bi-coders have built-in LEDs that blink during communications on the two-wire side and remain lit when power is supplied to the valve
- Run up to two typical solenoids up to 150 ft away from valve decoder using standard 14 ga irrigation wire per station wire (excluding BL-5201)
BaseLine BL-5204 Direct Burial 4-Station Bicoder Valve for Flow Sensors (BL5204)
$389.99 /each$389.99 /eachAdd to cart -
- Sensor decoder available with flow and clik inputs
- 150 ft maximum recommended distance, decoder to the solenoid
- Two-way communications
- Surge suppression, internal ground wire included
- Dual P and MV outputs may be assigned to decoders
- Wire path connectors included with each decoder
Hunter ICD-SEN Sensor Decoder Module for ACC/ACC2 (ICDSEN)
$375.00 /each$375.00 /eachAdd to cart -
• Decoder station sizes available: 1, 2, 4, 6 Max distance to decoder,14 AWG wire path: 10,000 ft. Sensor decoder available with Flow and Click inputs • Max distance to decoder, 12 AWG wire path: 15,000 ft. Max recommended distance, decoder to solenoid: 150 ft. Field programmable decoders • ICD-HP wireless handheld programmer compatible Two-way communications Surge suppression: Internal (ground wire included) • Dual pump/master valve outputs may be assigned to decoders Wire path connectors included with each decoder Number of wire paths: 6 • Automatic daily weather-based scheduling with optional Hunter Solar Sync sensorHunter ICD-400 4 Station Decoder Module for ACC/ACC2 (ICD400)
$320.00 /each$320.00 /eachAdd to cart -
- All bi-coders are fully sealed, submersion-proof, and approved for direct bury
- Shock resistant
- Freeze/heat resistant -4 to 140 degrees F
- Manufactured with 24 inches of 16 ga PVC jacketed solid core wire to connect to the two-wire and 24-inch of 18 ga PVC jacketed stranded core wire to connect to the valve wire
- Includes a built-in amperage meter that accurately measures and diagnoses valve solenoid electrical problems such as: "no current," "station short," or "over current"
- Multi-station bi-coders have color-coded wires for each station
- All bi-coders have built-in LEDs that blink during communications on the two-wire side and remain lit when power is supplied to the valve
- Run up to two typical solenoids up to 150 ft away from valve decoder using standard 14 ga irrigation wire per station wire (excluding BL-5201)
BaseLine BL-5202 Direct Burial 2-Station Bicoder Valve for Flow Sensors (BL5202)
$273.00 /each$273.00 /eachAdd to cart -
- Compatible with HCC and ICC2 Controllers: Up to 54 stations, plus master valve
- Plug-in Module allows hybrid operations of conventional and decoder stations
- Compatible with any direct-burial wire for maximum flexibility
Hunter EZ-DM Output Module for HCC and ICC2 Controllers, Up to 54 station (EZDM)
$265.00 /each$265.00 /eachAdd to cart -
WeatherTRAK H2O 2-Wire single station valve decoder. Includes four 3MTM DBR/Y-6 splice kits.- Easy to install
- Durable
- Easy manage your irrigation systems
Hydro Point Data Systems WeatherTRAK WT2W-H2O-1VD 2-Wire 1 Station H2O Valve Decoder (WTPWT2WH201VD)
$249.99 /each$249.99 /eachAdd to cart -
- Two-wire decoder system for I-Core controllers
- Dual-S external surge protection module
- Decoder module displays decoder operation and diagnostic information
- Can operate up to 48 stations of combined decoder and conventional control making system retrofit easy
- Water proof connectors for connection to two wire path included with all decoders and dual-S surge protection
- Solenoid finder feature assists in locating valves in the field
Hunter DUAL-2 2-Station Decoder Module for I-Core (DUAL2)
$249.00 /each$249.00 /eachAdd to cart -
- All bi-coders are fully sealed, submersion-proof, and approved for direct bury
- Shock resistant
- Freeze/heat resistant -4 to 140 degrees F
- Manufactured with 24 inches of 16 ga PVC jacketed solid core wire to connect to the two-wire and 24-inch of 18 ga PVC jacketed stranded core wire to connect to the valve wire
- Includes a built-in amperage meter that accurately measures and diagnoses valve solenoid electrical problems such as: "no current," "station short," or "over current"
- Multi-station bi-coders have color-coded wires for each station
- All bi-coders have built-in LEDs that blink during communications on the two-wire side and remain lit when power is supplied to the valve
- Run up to two typical solenoids up to 150 ft away from valve decoder using standard 14 ga irrigation wire per station wire (excluding BL-5201)
BaseLine BL-5201 Direct Burial 1-Station Bicoder Valve for Flow Sensors (BL5201)
$193.00 /each$193.00 /eachAdd to cart -
• Decoder station sizes available: 1, 2, 4, 6 Max distance to decoder,14 AWG wire path: 10,000 ft. Sensor decoder available with Flow and Click inputs • Max distance to decoder, 12 AWG wire path: 15,000 ft. Max recommended distance, decoder to solenoid: 150 ft. Field programmable decoders • ICD-HP wireless handheld programmer compatible Two-way communications Surge suppression: Internal (ground wire included) • Dual pump/master valve outputs may be assigned to decoders Wire path connectors included with each decoder Number of wire paths: 6 • Automatic daily weather-based scheduling with optional Hunter Solar Sync sensor
Hunter ICD-200 2 Station Decoder Module for ACC/ACC2 (ICD200)
$192.00 /each$192.00 /eachAdd to cart -
- Used to control third-party valves with DC latching solenoids
- Can be used after replacing AC latching solenoids with DC latching solenoids
- Max combined wire length between IVM-OUT and the solenoid is 48 inche
- Field Devices are installed along the 2-Wire path to interface with valves and other hardware.
- Interfaces with LX-IVM to control station valves and master valves
- Rain Bird WC20 connectors (included with IVMSOL; sold separately) to be used for all splices
Rain Bird LXIVMOUT 2-Wire Output Device (IVM-OUT) (F47120)
$169.00 /each$169.00 /eachAdd to cart -
- Two-wire decoder system for I-Core controllers
- Dual-S external surge protection module
- Decoder module displays decoder operation and diagnostic information
- Can operate up to 48 stations of combined decoder and conventional control making system retrofit easy
- Water proof connectors for connection to two wire path included with all decoders and dual-S surge protection
- Solenoid finder feature assists in locating valves in the field
Hunter DUAL-1 1-Station Decoder Module for I-Core (DUAL1)
$149.00 /each$149.00 /eachAdd to cart