-
The TEMPO Communications PE2003-G Pulser Ground Fault Locator identifies the exact location of even the smallest breaks in buried wire and cable insulation by encapsulating a high-voltage signal that radiates into the ground at the location of the faults. With the A-frame mounted receiver, a visual analog meter points the way to the source of the voltage.Sku: PE2003-G
Tempo PE2003-G Pulser Fault Locator | PE2003-G
PE2003-G $1,085.00$1,085.00Add to cart -
- Locates buried ground faults
- Dual power capability (hi/lo)
- Audible 'On' beeper
- Battery power indicator
- Custom molded case
- Rechargeable battery
Sku: GFL3000Armada GFL3000 Ground Fault Locator (GFL3000)
GFL3000 $1,049.00$1,049.00Add to cart -
- 8 D-Cell Transmitter Power
- 20% more transmitter power
- Wireless broadcast mode for simple cable connection
- AC interference/buzz removal
- Null or peak tracking receiver/wand
Sku: PRO800DArmada Pro 800 Wire and Valve Locator (PRO800D)
PRO800D $899.00$899.00Add to cart -
Trace and determine the depth of buried wires and metallic pipes with the 501 Tracker II Cable Locator from Tempo Communications. The 501 Tracker II underground wire locator offers three methods of connection to fit every location job. Direct connection for maximum signal, inductive coupling for a cable, and an internal inductive antenna for the underground location of buried and inaccessible cables. The lightweight receiver provides both audible and visual indications of signal strength for accurate identification. With its inductive signal detection, the 501 Tracker II cable and wire locator can be used on active or dead systems. Now you can quickly trace the path and determine the depth of buried wires, cables, and metallic pipes or conduit and find the ends of a cut cable without having to deactivate the systems.Sku: 501
Tempo 501 Tracker II Cable Locator | 501
501 $749.00$749.00Add to cart -
Trusted by technicians for over 25 years, the genuine 521A Wire and Valve Locator by Tempo Communications.
If you are looking for the best underground wire locator, look no further!
Requested by name, the industry-leading 521A Wire and Valve Locator is a universal troubleshooting and maintenance tool for electronically controlled sprinkler irrigation systems. You no longer have to search blindly for buried utilities. Use the 521A locator to confidently locate buried wires and underground valves with speed. Use the 521A to precisely follow the path of a buried wire and measure the wire depth. The ergonomic, easy-to-use receiver can accurately locate underground wire breaks, large nicks, and solenoid valves. The high-power, adjustable transmitter features audio and visual indications of signal strength and offers an extended range that allows the user to select the best signal for maximum performance.
Don’t trust your irrigation maintenance to just any wire and valve locator, request the original 521A Locator from Tempo.
Sku: 521ATempo 521A Wire and Valve Locator | 521A
521A $679.00$679.00Add to cart -
- Marking spray attachment
- Draw freeform paths in real-time
- Quick & easy material estimation
- Calculate area (sq. ft.) cubic yards
- No need for GPS, cell service, or internet (Works anywhere)
- Guide mode for relocating key points
- Add notes & images to projects
- Easy Exporting (DXF, JPG, PLTT)
- Change measurement unit (feet, yard, meter, inch)
- IP54 water and dust resistant
in PLOTTSku: 10003CARTAPLOTT Carta Bluetooth Measuring & Mapping Wheel with Marking Spray Attachment (10003CARTA)
10003CARTA $379.00$379.00Add to cart -
- Measures line currents from 5 microamperes
- Measures AC volts and amps, DC volts and ohms
- True RMS measurement
- Auto-off after 30 minutes idle
- Back-lit screen for dark areas
Sku: PRO95Armada PRO95 RMS Clamp Meter (PRO95)
PRO95 $269.00$269.00Add to cart -
- Wire Tracing Capability: Accurately traces and locates buried wires or cables in irrigation systems and other low-voltage applications.
- Tone Generator: Sends a clear, detectable signal through the wire for easy tracking and identification.
- High-Sensitivity Probe: Detects the signal transmitted by the tone generator, helping users follow the path of the wire with precision.
- Fault Detection: Helps identify breaks, cuts, or other faults in buried wires or cables.
- Versatile Use: Suitable for irrigation systems, landscape lighting, and other electrical systems using low-voltage wiring.
- User-Friendly Operation: Simple to use, allowing even less experienced technicians to easily locate and troubleshoot wiring problems.
- Portable and Durable Design: Compact and robust, ideal for use in outdoor environments, offering durability for fieldwork
Sku: PRO50KArmada PRO50K Digital AC/DC Solenoid Activator with Multimeter Kit with Filter Probe (PRO50K)
PRO50K $229.00$229.00Add to cart -
TEMPO Communications continues its excellence in irrigation system troubleshooting with the Model 24BK Station Master Pro. The upgraded Station Master Pro is a portable, battery-operated irrigation system tester that combines solenoid activation and wire identification for easy diagnosis of faults in irrigation systems. The easy-to-understand LEDs notify the technician if sufficient voltage is being supplied by the controller and the condition of the solenoid. The solenoid activation mode is used to activate valve solenoids either from the controller or at the valve, along with testing the continuity of the solenoids making it easy for the technician to find the fault. In chatter mode, the Station Master Pro will turn the solenoid off and on about once per second to aid in locating the valve by ear. In addition, it has the added functionality of providing tone generation to identify wires that can be traced with any TEMPO amplifier probe. It also includes a clip and piercing pin bent nose clip for use on insulated wires. This way you can connect the unit for testing without cutting or stripping wires.Sku: 24BK
Tempo 24BK Irrigation Tester Kit | 24BK
24BK $199.99$199.99Add to cart -
- Activate solenoids
- Verify 24v clock output
- Detect short/open wires
- Chatter solenoids
- Check solenoid condition
- ID wire with tone/probe
Sku: PRO48KArmada PRO48K Irrigation Station Test Kit (PRO48K)
PRO48K $177.99$177.99Add to cart -
- Check Outlets and Insulated Cables for Power Voltage Before Handling or Using Them.
- Fully insulated for safety. IEC 61010 rated and CE compliant.
- Two range settings allow the detection of low and high voltages like 12 volts AC and 120 volts AC in a single unit.
- Audible and visual indicators.
- Backlighted LCD Display and Headlight.
- Uses two (2) AAA Batteries (not included).
Sku: PRO50Armada PRO50 Digital Solenoid Chatter (PRO50)
PRO50 $175.00$175.00Add to cart -
- Automatic AC or DC sensing
- Automatic decimal placement
- Automatic measurement of amps, volts, and resistance
- Automatic backlighting
- Automatic power-down
- No fuses to blow
Sku: PRO90Armada PRO90 Automatic Clamp Multimeter (PRO90)
PRO90 $149.00$149.00Add to cart -
The Station Master Pro is a battery-operated irrigation system diagnostic tester combining solenoid activation and wire identification. LEDs indicate if sufficient voltage is being supplied by the controller and the condition of the solenoid. The solenoid activation mode is used to activate valve solenoids either from the controller or at the valve, along with testing continuity of the solenoids. Chatter mode assists in locating the valve by ear. Tone generator helps identify wires when combined with inductive probe. The test leads allow the technician to connect the unit without cutting or stripping the wires.Sku: 24B
Tempo 24B Station Master Pro | 24B
24B $137.99$137.99Add to cart -
- Activate solenoids
- Verify 24v clock output
- Detect short/open wires
- Chatter solenoids
- Check solenoid condition
- ID wire with tone/probe
Sku: PRO48Armada PRO48 Irrigation Station Tester (PRO48)
PRO48 $129.00$129.00Add to cart -
The Tempo 701K-G/6A is a fully upgraded version of our powerful 701K industry-standard Professional Tone and Probe Tracing kit, including ABN clips. The 701K-G/6A Tone and Probe kit offers superior tracing for low-voltage applications such as telephone, data, and security alarm wiring. Essential equipment for the internal wiring technician, the 701K-G/6A provides the ability to check the voltage on wire pairs as well as generate a tagging tone along the wire which is then picked up by the tracing probe. TEMPO is proud to introduce fully upgraded versions of its tone generator and wire tracing probe kits. This all-new line of products offers superior tracing for low-voltage applications such as telephone, data, and security alarm wiring. Essential equipment for the internal wiring technician, the Tempo tone and probe kits provide the ability to check Voltage on wire pairs as well as generate a tagging tone along the wire, which is then picked up by the tracing probe. Featuring overall improved internal circuitry in both the amplifier and the tone generator, all of the new tone probe kits promise to provide an enhanced customer experience for tracing and identifying single conductors or cables within bundles, either at midpoint or at remote ends. All of the new tone and probe kits are assembled in the USA and are CE-certified. When it comes to superior tracing capability, TEMPO's tone and probe kits are faster, safer, and easier than ever before.Sku: 701K-G/6A
Tempo 701K-G/6A Classic Tone & Probe Kit, Standard w/ABN clips | 701K-G/6A
701K-G/6A $102.99$102.99Add to cart -
Marking spray attachment for the Carta Mapping Wheel. Allows you to mark the property physically as you map it out digitally on your phone.
- Paint sprayer attachment for the Plott Carta measuring wheel (Accessory Only)
- Click here for the complete PLOTT Carta Wheel system
in PLOTTSku: 907196PLOTT Carta Paint Sprayer Attachment (907196)
907196 $69.00$69.00Add to cart