-
- 2 in. (50/60) plastic industrial irrigation valve
- Durable glass-filled nylon construction with fabric-reinforced rubber diaphragm for long life and reliable performance
- Globe configuration
- Normally closed, forward flow design
- Slow closing to prevent water hammer and subsequent system damage
- Low flow capability for a wide range of applications
- One-piece solenoid design with captured plunger and spring for easy servicing; prevents loss of parts during field service
- Flow control handle adjusts water flows as needed
Rain Bird 200PESB – 2 in. Inlet Inline Plastic Industrial Irrigation Scrubber Valve (B35213)
$214.89 /each$214.89 /eachAdd to cart -
- 1 in. (26/34) Brass Valve
- Normally closed, reverse flow design ensures the valve will fail in the closed position if a tear or rip in the diaphragm occurs
- Prevents flooding, water waste, and landscape damage
- Slow closing to prevent water hammer and subsequent system damage.
- One-piece solenoid design with captured plunger and spring for easy servicing
- Prevents loss of parts during field service
- Flow control handle adjusts water flow as needed
- Manual internal bleed operates the valve without allowing water into the valve box
- Allows pressure regulator adjustment without turning on the controller
Rain Bird 100EFBCP – 1 in. Brass Irrigation Valve (B32553)
$214.89 /each$214.89 /eachAdd to cart -
- 2 in. (50/60) chlorine-resistant valve for reclaimed water irrigation applications
- Plastic diaphragm and scrubber components molded of chlorine- and chemical-resistant plastic material
- Durable glass-filled nylon construction for long life and heavy-duty performance at 200 psi (13,80 bars) pressure
- Stainless steel studs molded into the body. Bonnet can be attached and removed easily without damaging threads
- One-piece solenoid design with captured plunger and spring for easy servicing; prevents loss of parts during field service
- External bleed protects the solenoid ports from debris when system is flushed
- Purple flow control handle standard on PESB-R Series valves
Rain Bird 200PESBR – 2 in. Inlet Inline Plastic Industrial Irrigation Valve (For Reclaimed Water) (B37400)
$212.73 /each$212.73 /eachAdd to cart -
- With a lightning rating exceeding 20,000 volts, the new 220 Series brass valves offer nearly three times the lightning protection of competitive products
- Compact EZReg® dial-design technology (factory or field installed - no need to remove solenoid).
- With its 20,000-volt lightning rating, the industry's highest, the Spike Guard™ solenoid has virtually eliminated the need for solenoid replacement in high lightning environments. And with 1/2 the amperage draw of traditional solenoids you can run twice as many sprinklers simultaneously, reduce the cost of wiring during initial installation, or increase the distance from controller to sprinkler.
- Ensures the P-220 can operate at pressures up to 220 psi (15 Bar).
- Compact EZReg® dial-design technology (factory or field installed - no need to remove solenoid).
- Keeps valve box dry and easy to use.
- Simple verification of downstream pressure.
Toro P220 1 1/2 in. Valve with EZReg (P220-27-06)
$204.09 /each$204.09 /eachAdd to cart -
- External and internal manual bleed allows quick and easy at valve activation
- Double-beaded diaphragm seal design for superior leak-free performance
- Fabric-reinforced EPDM diaphragm and EPDM seat ensure superior performance in all water conditions
- Captive bonnet bolts provide hassle-free valve maintenance
- Low flow capability allows for the use of Hunter's micro irrigation products
- Accu-Sync pressure regulation
- Optional reclaimed water ID handle
- Globe valve without flow control
Hunter IBV-101-GFS 1 in. Brass Valve w/ Flow Control and Filter Sentry (IBV101GFS)
$204.09 /each$204.09 /eachAdd to cart -
- 150-mesh external control water filter and three-way solenoid
- Internal and external bleed (flush mode)
- Control water filter allows easy external service
- Selectable normally open or normally closed mode (factory set at normally closed)
Irritrol Century Plus Glass-Filled Nylon Globe/Angle Valve 2 in. FIPT with Flow Control (100P2)
$184.65 /each$184.65 /eachAdd to cart -
– Diaphragm Reliability Low seat design with two-piece internal assembly decreases pressure loss and improves flow when compared to valves with high seat design, and helps protect diaphragm from harmful debris. – Scrubbing Rod & Filter System Self-cleaning metering rod system ensures that only “clean” water enters the upper diaphragm chamber offering consistent, trouble-free performance. – EPDM Diaphragm Offers long lasting performance in both potable and dirty/recycled water applications. All EPDM rubber parts outlast commonly used Buna-N parts when exposed to reclaimed water. – Extreme Durability Made of high-quality Red Brass. – Universality Consistent design ensures backward compatibility when replacing parts in older valves.Superior 1 1/2″ 950 Series Electric Brass In-Line Valve (950150)
$183.56 /each$183.56 /eachAdd to cart -
- External and internal manual bleed allows quick and easy at valve activation
- Double-beaded diaphragm seal design for superior leak-free performance
- Fabric-reinforced EPDM diaphragm and EPDM seat ensure superior performance in all water conditions
- Captive bonnet bolts provide hassle-free valve maintenance
- Low flow capability allows for the use of Hunter's micro irrigation products
- Accu-Sync pressure regulation
- Optional reclaimed water ID handle
- Globe valve without flow control
Hunter ICV-151G-FS-R 1 1/2 in. Glass Filled Nylon Reclaimed Valve w/ Flow Control and Filter Sentry (ICV151GFSR)
$182.49 /each$182.49 /eachAdd to cart -
- 1 1/2 in. (40/49) chlorine-resistant valve for reclaimed water irrigation applications
- Plastic diaphragm and scrubber components molded of chlorine- and chemical-resistant plastic material
- Durable glass-filled nylon construction for long life and heavy-duty performance at 200 psi (13,80 bars) pressure
- Stainless steel studs molded into the body. The bonnet can be attached and removed easily without damaging threads
- One-piece solenoid design with captured plunger and spring for easy servicing; prevents loss of parts during field service
- External bleed protects the solenoid ports from debris when the system is flushed
- Purple flow control handle standard on PESB-R Series valves
Rain Bird 150PESBR – 1 1/2 in. Inlet Inline Plastic Industrial Irrigation Valve (For Reclaimed Water) (B37300)
$173.85 /each$173.85 /eachAdd to cart -
– Diaphragm Reliability Low seat design with two-piece internal assembly decreases pressure loss and improves flow when compared to valves with high seat design, and helps protect diaphragm from harmful debris. – Scrubbing Rod & Filter System Self-cleaning metering rod system ensures that only “clean” water enters the upper diaphragm chamber offering consistent, trouble-free performance. – EPDM Diaphragm Offers long lasting performance in both potable and dirty/recycled water applications. All EPDM rubber parts outlast commonly used Buna-N parts when exposed to reclaimed water. – Extreme Durability Made of high-quality Red Brass. – Universality Consistent design ensures backward compatibility when replacing parts in older valves.
Superior 1″ 950 Series Electric Brass Dirty Water In-Line Valve (950100DW)
$172.76 /each$172.76 /eachAdd to cart -
– Diaphragm Reliability Low seat design with two-piece internal assembly decreases pressure loss and improves flow when compared to valves with high seat design, and helps protect diaphragm from harmful debris. – Scrubbing Rod & Filter System Self-cleaning metering rod system ensures that only “clean” water enters the upper diaphragm chamber offering consistent, trouble-free performance. – EPDM Diaphragm Offers long lasting performance in both potable and dirty/recycled water applications. All EPDM rubber parts outlast commonly used Buna-N parts when exposed to reclaimed water. – Extreme Durability Made of high-quality Red Brass. – Universality Consistent design ensures backward compatibility when replacing parts in older valves.
Superior 1 1/4″ 950 Series Electric Brass In-Line Valve (950125)
$172.76 /each$172.76 /eachAdd to cart -
- With a lightning rating exceeding 20,000 volts, the new 220 Series brass valves offer nearly three times the lightning protection of competitive products
- Compact EZReg® dial-design technology (factory or field installed - no need to remove solenoid).
- With its 20,000-volt lightning rating, the industry's highest, the Spike Guard™ solenoid has virtually eliminated the need for solenoid replacement in high lightning environments. And with 1/2 the amperage draw of traditional solenoids you can run twice as many sprinklers simultaneously, reduce the cost of wiring during initial installation, or increase the distance from controller to sprinkler.
- Ensures the P-220 can operate at pressures up to 220 psi (15 Bar).
- Compact EZReg® dial-design technology (factory or field installed - no need to remove solenoid).
- Keeps valve box dry and easy to use.
- Simple verification of downstream pressure.
Toro P220 1 in. Valve with EZReg (P220-27-04)
$171.69 /each$171.69 /eachAdd to cart -
- 1 1/2 in. (40/49) plastic industrial irrigation valve
- Durable glass-filled nylon construction with fabric-reinforced rubber diaphragm for long life and reliable performance
- Globe configuration
- Normally closed, forward flow design
- Slow closing to prevent water hammer and subsequent system damage
- Low flow capability for a wide range of applications
- One-piece solenoid design with captured plunger and spring for easy servicing; prevents loss of parts during field service
- Flow control handle adjusts water flows as needed
Rain Bird 150PESB – 1 1/2 in. Inlet Inline Plastic Industrial Irrigation Scrubber Valve (B35113)
$170.61 /each$170.61 /eachAdd to cart -
- External and internal manual bleed allows quick and easy at valve activation
- Double-beaded diaphragm seal design for superior leak-free performance
- Fabric-reinforced EPDM diaphragm and EPDM seat ensure superior performance in all water conditions
- Captive bonnet bolts provide hassle-free valve maintenance
- Low flow capability allows for the use of Hunter's micro irrigation products
- Accu-Sync pressure regulation
- Optional reclaimed water ID handle
- Globe valve without flow control
Hunter ICV-201G 2 in. Glass Filled Nylon Globe Valve (ICV201G)
$158.73 /each$158.73 /eachAdd to cart -
- 2 in. (50/60) plastic industrial irrigation valve
- Durable glass-filled nylon construction with fabric-reinforced rubber diaphragm for long life and reliable performance
- Globe configuration
- Normally closed, forward flow design
- Slow closing to prevent water hammer and subsequent system damage
- Low flow capability for a wide range of applications
- One-piece solenoid design with captured plunger and spring for easy servicing; prevents loss of parts during field service
- Flow control handle adjusts water flows as needed
Rain Bird 200PEB – 2 in. Inlet Inline Plastic Industrial Irrigation Valve (B34583)
$149.01 /each$149.01 /eachAdd to cart -
- External and internal manual bleed allows quick and easy at valve activation
- Double-beaded diaphragm seal design for superior leak-free performance
- Fabric-reinforced EPDM diaphragm and EPDM seat ensure superior performance in all water conditions
- Captive bonnet bolts provide hassle-free valve maintenance
- Low flow capability allows for the use of Hunter's micro irrigation products
- Accu-Sync pressure regulation
- Optional reclaimed water ID handle
- Globe valve without flow control
Hunter ICV-151G-FS 1 1/2 in. Glass Filled Nylon Valve w/ Flow Control and Filter Sentry (ICV151GFS)
$145.77 /each$145.77 /eachAdd to cart
