Knuckle: Solid brass with dial adjustment for easy adjustments
Shroud: Brass with a clear glass convex lens and double o-ring gasket
Socket: Spring-loaded ceramic bi-pin socket with dual contact and lamp clips
Wire: Industry First, double wire lead pre-connected to the fixture, 16 AWG (UL listed), brown
-25 foot wire lead, pre-stripped for easy wire connection
-18 inch wire lead, LED connection ready
Stake: Plastic ground stake, attached to the fixture (8.5 in; 21.6 cm length)
Warranty: Lifetime warranty on fixture housing
Certification: Complies with the requirements of UL-1838 and
CAN/CSA-C22.2 No. 250.7. Identified with the ETL and cETL Listed Mark
Unique “reverse flow” design permits equal pressure distribution on both sides of the diaphragm, regardless of line pressure, providing zero stress to prevent “stretching,” a common cause of valve failure
Diaphragm’s self-cleaning ports constantly flex, inhibiting sand and silt from blocking valve action
Molded shock cone for smooth operation and reduction of water hammer
Easy-to-use internal manual bleed lever; bleeds valve downstream; has positive stops for open and closed positions
Marine-grade S20P solenoid with stainless steel actuator
High-strength glass-filled nylon body and cover with 1⁄4″ stainless steel cover bolts and mating brass body inserts
Non-rising flow control stem throttles valve from fully open to the closed position on flow control models
4 programs A, B, C program D can operate concurrently
Indoor or outdoor rated
Zone run times settable from 1 min - 9 hr. 55 min
Rain delay of 1 to 7 days
SLW1/SLW5 weather stations extended rain delay programmable from 0 - 99 hr. seasonal % adjust by program, by month
Three independent programs
Large backlit LCD display
With over 500,000 SmartLine Controllers saving vast amounts of water around the world, your next project will be added to the growing list. The SmartLine feature set exceeds that of most high-end controllers, yet was engineered to make ET-Based Water Management affordable for any sized project.
With an innovative snap-on lens, the LD ledge light is easy to install and service. At less than 5 in. (127 mm) wide, it shines as FX Luminaire’s smallest ledge light.
Silicone-encapsulated COB LED
Tamper-resistant features
Superior outdoor TGIC powder-coated finish options
The Core of the FX Up Light Family. The RS allows designers to use different lamps to create custom effects while maintaining consistency in style. With knowledge of the science and art of lighting, a professional designer can choose a lamp source to suit the desired effect or emotional response.