No products in the cart.
-
– Easy Maintenance
External plumbing allows easy maintenance to filter assembly– Reinforced Diaphragm
600 lb test nylon reinforced EPDM diaphragm– Non-continuous Flow
Non-continuous flow through solenoid extends the performance of filter assembly– No Minimum Flow
No minimum flow requirement– Dual Chamber Design
Dual chamber design provides no minimum flow capabilitySuperior 2″ 3200 Normally Closed Brass Master Valve (3200200)
$479.00$479.00Add to cart -
Flow biCoders™ ensure compatibility between virtually any third-party flow device and any Baseline controller, so retrofitting an existing site to a Baseline system is easy. Baseline controllers are equipped with powerful flow management and monitoring software to quickly react to high and low flow situations, isolate faulty zones, and protect your site from unexpected flow problems.BaseLine BL-5308 Standard Flow Sensor Meter Bicoder (BL-5308)
$429.99$429.99Add to cart -
800 automatic brass adaptor is ideal for converting existing manual valves to automatic and is designed to fit existing Superior, Champion, Lawnlife, Orbit, and Aqualine brass manual valves.Superior Model 800 Electric Valve Adaptor Brass 1 1/2in. Top Assembly (800150CH00)
$399.00$399.00Add to cart -
- Pressure regulation: 40 PSI
- Flow: 20 to 80 GPM
- Operating pressure: up to 120 PSI
- Operating temperature: up to 120°F
- Standard filter screen: 150 mesh (100 microns) SS
- Optional filter screens: 80 mesh (180 microns); 120 mesh (125 microns); SS
- Disc filter available: 120 mesh (125 microns)
Hunter ICZ Drip Control Zone Kit, 1.5″, 40 PSI 20 to 80 GPM (ICZ-151-40-XL)
$399.00$399.00Add to cart -
- All bi-coders are fully sealed, submersion-proof, and approved for direct bury
- Shock resistant
- Freeze/heat resistant -4 to 140 degrees F
- Manufactured with 24 inches of 16 ga PVC jacketed solid core wire to connect to the two-wire and 24-inch of 18 ga PVC jacketed stranded core wire to connect to the valve wire
- Includes a built-in amperage meter that accurately measures and diagnoses valve solenoid electrical problems such as: "no current," "station short," or "over current"
- Multi-station bi-coders have color-coded wires for each station
- All bi-coders have built-in LEDs that blink during communications on the two-wire side and remain lit when power is supplied to the valve
- Run up to two typical solenoids up to 150 ft away from valve decoder using standard 14 ga irrigation wire per station wire (excluding BL-5201)
BaseLine BL-5204 Direct Burial 4-Station Bicoder Valve for Flow Sensors (BL5204)
$389.99$389.99Add to cart -
- 2 in. (50/60) Brass Valve
- Normally closed, reverse flow design ensures valve will fail in the closed position if a tear or rip in the diaphragm occurs
- Prevents flooding, water waste and landscape damage
- Slow closing to prevent water hammer and subsequent system damage.
- One-piece solenoid design with captured plunger and spring for easy servicing
- Prevents loss of parts during field service
- Flow control handle adjusts water flow as needed
- Manual internal bleed operates the valve without allowing water into the valve box
- Allows pressure regulator adjustment without turning on the controller
Rain Bird 200EFBCP – 2 in. Brass Irrigation Valve (B32953)
$369.00$369.00Add to cart -
- External and internal manual bleed allows quick and easy at valve activation
- Double-beaded diaphragm seal design for superior leak-free performance
- Fabric-reinforced EPDM diaphragm and EPDM seat ensure superior performance in all water conditions
- Captive bonnet bolts provide hassle-free valve maintenance
- Low flow capability allows for the use of Hunter's micro irrigation products
- Accu-Sync pressure regulation
- Optional reclaimed water ID handle
- Globe valve without flow control
Hunter IBV-201-GFS 2 in. Brass Valve w/ Flow Control and Filter Sentry (IBV201GFS)
$349.00$349.00Add to cart -
- External and internal manual bleed allows quick and easy at valve activation
- Double-beaded diaphragm seal design for superior leak-free performance
- Fabric-reinforced EPDM diaphragm and EPDM seat ensure superior performance in all water conditions
- Captive bonnet bolts provide hassle-free valve maintenance
- Low flow capability allows for the use of Hunter's micro irrigation products
- Accu-Sync pressure regulation
- Optional reclaimed water ID handle
- Globe valve without flow control
Hunter IBV-151-GFS 1 1/2 in. Brass Valve w/ Flow Control and Filter Sentry (IBV151GFS)
$329.00$329.00Add to cart -
- External and internal manual bleed allows quick and easy at valve activation
- Double-beaded diaphragm seal design for superior leak-free performance
- Fabric-reinforced EPDM diaphragm and EPDM seat ensure superior performance in all water conditions
- Captive bonnet bolts provide hassle-free valve maintenance
- Low flow capability allows for the use of Hunter's micro irrigation products
- Accu-Sync pressure regulation
- Optional reclaimed water ID handle
- Globe valve without flow control
Hunter ICV-201G-FS-R 2 in. Glass Filled Nylon Valve w/ Flow Control and Filter Sentry, Reclaimed (ICV201GFSR)
$299.00$299.00Add to cart -
- 1.5 in. (40/49) Brass Valve
- Normally closed, reverse flow design ensures valve will fail in the closed position if a tear or rip in the diaphragm occurs
- Prevents flooding, water waste and landscape damage
- Slow closing to prevent water hammer and subsequent system damage.
- One-piece solenoid design with captured plunger and spring for easy servicing
- Prevents loss of parts during field service
- Flow control handle adjusts water flow as needed
- Manual internal bleed operates the valve without allowing water into the valve box
- Allows pressure regulator adjustment without turning on the controller
Rain Bird 150EFBCP – 1 1/2 in. Brass Irrigation Valve (B32853)
$289.99$289.99Add to cart -
- External and internal manual bleed allows quick and easy at valve activation
- Double-beaded diaphragm seal design for superior leak-free performance
- Fabric-reinforced EPDM diaphragm and EPDM seat ensure superior performance in all water conditions
- Captive bonnet bolts provide hassle-free valve maintenance
- Low flow capability allows for the use of Hunter's micro irrigation products
- Accu-Sync pressure regulation
- Optional reclaimed water ID handle
- Globe valve without flow control
Hunter ICV-201G-FS 2 in. Glass Filled Nylon Valve w/ Flow Control and Filter Sentry (ICV201GFS)
$289.00$289.00Add to cart -
- 3 in. Globe Valve
- Glass-Filled Nylon
- 220 PSI
- Inlets: Female x Female
- with Flow Control
- Flow: 0.1 to 40 GPM
Hunter ICV-301 3 in. Globe/Angle Valve Flow Control (ICV301)
$289.00$289.00Add to cart -
Synthetic turf accessory, rotor vault hanger, and grade adjustment bracket for ST-1600-HS-B Rotor; for use with ST-1600-KITHunter ST-BKT-1600 Rotor Vault Hanger w/ Elevation Adjustment Bracket Block System (STBKT1600)
$280.00$280.00Add to cart -
- All bi-coders are fully sealed, submersion-proof, and approved for direct bury
- Shock resistant
- Freeze/heat resistant -4 to 140 degrees F
- Manufactured with 24 inches of 16 ga PVC jacketed solid core wire to connect to the two-wire and 24-inch of 18 ga PVC jacketed stranded core wire to connect to the valve wire
- Includes a built-in amperage meter that accurately measures and diagnoses valve solenoid electrical problems such as: "no current," "station short," or "over current"
- Multi-station bi-coders have color-coded wires for each station
- All bi-coders have built-in LEDs that blink during communications on the two-wire side and remain lit when power is supplied to the valve
- Run up to two typical solenoids up to 150 ft away from valve decoder using standard 14 ga irrigation wire per station wire (excluding BL-5201)
BaseLine BL-5202 Direct Burial 2-Station Bicoder Valve for Flow Sensors (BL5202)
$273.00$273.00Add to cart -
- Heavy Duty - Made of high-quality red brass
- Low Flow Optimized - Allows complete opening and closing on flow as low as 1 gallon per hour
- No Back-pressure - Not affected by excessive back-pressure
- Straight or Anti-siphon - Available in Straight-thru or Anti-Siphon body design
- Slow Close - Slow closing: no water hammer, surge, or nose
Superior 850DIAS 3/4″ Brass Anti-Siphon Valve (850DIAS075)
$229.00$229.00Add to cart -
– Backward Compatible Consistent design ensures backward compatibility – Self Cleaning Self-cleaning scrubber rod and filter system for protection against debris entering diaphragm chamber – Low Seat Low seat design decreases pressure loss and improves flow – Reinforced 600 lb. test nylon reinforced EPDM diaphragm – Diaphragm Reliability Two-piece internal assembly protects diaphragm – Easy to Disassemble Coil can be rotated 360° and removed without removing solenoid operator – Pressure Regulation Integrated Pressure Regulation Module maintains constant pressure between 10 and 125 PSI – Made of high-quality Red Brass – Fitted with Schrader valve for use with pressure gaugeSuperior 1″ 950 Series Electric Brass Pressure Regulation In-Line Valve (950100PRS)
$209.99$209.99Add to cart