No products in the cart.
-
- Flow meter connects to Hydrawise ready controllers and Hydrawise software and shows total water use by zone
- Flow directional markings on body and Temperature range (water) – up to 100°F
- Meters are factory calibrated and allows for manual recording at the meter in gallons
- Monitors the system to alert for high- and low-flow conditions
- Electrical connection – 2 dedicated wires in shielded cable
Hunter Hydrawise HC-100-FLOW 0.3 to 34 GPM Flow Meter 1″ NPT Thread (HC100FLOW)
$189.00$189.00Add to cart -
-
Simple-insertion flow sensor for metering and reacting to real-time flow conditions
-
Provides station-level flow monitoring for reaction to high- or low-flow conditions, helping to protect against flood damage and erosion
-
Compatible with Hunter ACC2 and legacy ACC and I-Core™ Controllers, as well as ICD-SEN Sensor Decoders, for flexible installation in a variety of settings
-
Compatible with ICC2 Controller via Centralus communication modules
-
Easy connection up to 1,000' from controller or sensor decoder
-
The sensor is pre-calibrated for K-factor and Offset based on pipe size, allowing for quick setup and programming within the controller
Hunter HFS Wired Plastic 2 Wire Flow Sensor (HFS)
$185.99$185.99Add to cart -
-
- Works with most irrigation controllers
- Up to 500 ft line-of-sight
- Wireless communication
- Freeze detection
- Slim design
- Automatic calibration
Toro PSS-KIT Wireless Precision Soil Moisture Sensor Kit (PSS-KIT)
$161.00$161.00Add to cart -
- Flow monitoring
- Instant high- and low-flow alerts
- Leak detection
- Water outage during irrigation
- Total water use reporting
- Zone water use reporting
- The battery-operated transmitter connects to the flow meter to detect and communicate flow rates and totals
Hunter Hydrawise Wireless HC Flow Meter Kit (WHCFLOW)
$159.00$159.00Add to cart -
This sensor automatically adjusts controller run times daily based on local climate conditions to reduce water usage and improve plant health.- Automatically adjusts irrigation duration based on weather conditions using on-site solar radiation and air temperature
- Quick Response® instant rain shutoff and freeze shutoff at 37°F
- Maintenance-free design with integrated battery for wireless models
- Adjustable vent ring allows for shorter or longer reset period
- Rugged polycarbonate housing and metal extension arm
- Includes gutter bracket and wall mount with wireless models
- Use with Hunter standard controllers, Centralus™ with ICC2 or ACC2, and IMMS™ online central control installations
Hunter WSS-SEN Wireless Solar Sync ET/Rain/Freeze Weather Sensor (WSSSEN)
$149.98$149.98Add to cart -
- Rain or freeze sensing included
- Rain shut-off settable from 1/8 to 3/4 inch
- Enables weather-based smart watering schedules
- Use Auto Adjust watering made to prevent runoff
- Weather station enhanced with solar shield protection
Weathermatic SLW1 SmartLine ET/Rain/Freeze Weather Sensor Wired (SLW1)
$149.00$149.00Add to cart -
- Flow meter connects to Hydrawise ready controllers and Hydrawise software and shows total water use by zone
- Flow directional markings on body and Temperature range (water) – up to 100°F
- Meters are factory calibrated and allows for manual recording at the meter in gallons
- Monitors the system to alert for high- and low-flow conditions
- Electrical connection – 2 dedicated wires in shielded cable
Hunter Hydrawise HC-075-FLOW 0.22 to 21 GPM Flow Meter ¾” NPT Thread (HC075FLOW)
$137.70$137.70Add to cart -
- Replacement Sensor Transmitter Only
- Saves water and reduces water bills with smart weather-sensing technology.
- Compatible with Hunter irrigation controllers for easy installation and use.
- Adjusts watering schedules based on real-time weather conditions for optimal efficiency.
Hunter WSS-TR Wireless Solar Sync ET/Rain/Freeze Weather Sensor Transmitter Only (WSSTR)
$129.00$129.00Add to cart -
This sensor prevents water waste by measuring soil moisture and shutting off irrigation when a pre-set level is reached.- View current soil moisture level and status at a glance
- One-touch override allows soil moisture bypass for special conditions
- Low-voltage outdoor enclosure powered by the host controller
- Connect to sensor inputs, or use to interrupt common wires in virtually any 24 VAC irrigation system
- Use with Solar Sync® sensor for maximum water savings
Hunter SOIL-CLIK Wired Soil Moisture Tensiometer Sensor Module and Probe Kit (SOILCLIK)
$109.98$109.98Add to cart -
For simple, water-saving, weather-adjusting, and automatic irrigation control, look to the Irritrol Climate Logic weather system. The three-component kit consists of a wireless weather sensor to transmit data from the outdoors, a receiver module to attach to the controller, and an SD card loaded with 40 years of historical weather information (specific to geographic location).Irritrol Climate Logic Wireless Receiver Module (CL-M1)
$109.00$109.00Add to cart -
Hot
• Flo-Watch: This functionality in the ESP-ME3 or ESP-2WIRE Controller uses information from the FG100 to learn the flow and monitor for low or excessive flow conditions caused by broken lines or heads—saving water, protecting plants, and preventing property flooding. • Winter ready: Designed to withstand high-burst pressure blowouts. Does not need to be removed during winter months. • No specialty PE cable: Easily install the FG100 with a standard 18g irrigation wire. • Threaded or slip unions: Threaded or slip unions allow for faster installation and easy maintenance. • Rain Bird App: Pair the FG100 with the ESP-ME3 Controller to check system health from anywhere, and control advanced flow settings via the Rain Bird Mobile App. Available for iPhone and Android. • LNK2 WiFi Module required. • Flow Sensing for ESP-ME3, ESP-2WIRE, compatible with ESP-LX Series (LXME, LXD, IVM).
Rain Bird FG100 Plastic Wired Flow Sensor 1 in. NPT Threaded Unions (A83926)
$99.00$99.00Add to cart -
Hunter Wireless Mini-Clik (WM-CLIK) rain and freeze sensor acts as a switch that breaks the circuit to an irrigation system’s solenoid valves in response to rain. This allows the timer to advance as scheduled, but keeps the valves from opening the water flow. Once the Wireless Mini-Clik (WM-CLIK) has dried sufficiently, the switch closes again to allow normal operation.
- Up to 800' (line-of-sight) wireless range from receiver to sensor transmitter
- Rain fall detection ⅛" to ¾" of rainfall
- Freeze shutoff at 37° F
- Optional Quick Response feature for faster shutdown
- Compatible with Hunter and most non-Hunter controllers
Hunter Wireless Mini-Clik (WM-CLIK) Rain & Freeze Sensor Kit (WMCLIK)
$97.00$97.00Add to cart -
- Designed exclusively for the Toro Evolution Series Controller
- The controller adjusts run times to meet the optimum moisture requirements for the next watering day
- Uses live temperature and solar measurements as well as historical weather data for your location to calculate the amount of water needed from the irrigation system.
- Dimensions: 2.75" 7 cm in Width X 7" 17.8 cm in Height over 2" [5 cm] antenna X 6.25" 15.9 cm in Depth over 4" [10.2 cm] mounting bracket
- 9V Alkaline battery included
Toro EVO-WS Evolution Wireless Weather Sensor (EVO-WS)
$94.95$94.95Add to cart -
- Automatic Weather Adjustments: Adapts irrigation schedules based on real-time weather changes, including temperature and sunlight.
- Efficient Water Management: Ensures optimal water usage by adjusting run times, and reducing water waste.
- Compatible with Hunter Controllers: Designed to work seamlessly with Hunter controllers equipped with Solar Sync compatibility.
- Easy Installation: Simple module replacement, no need for rewiring or complex setup.
- Durable Design: Engineered to withstand outdoor environments, ensuring reliable performance and longevity.
- Cost-Effective Solution: Replace only the module, saving costs without compromising on irrigation efficiency.
- Energy-Efficient Operation: Conserves energy by operating efficiently based on local weather patterns.
Hunter SOLAR-SYNC-MOD Solar Sync Module (SOLARSYNCMOD)
$89.00$89.00Add to cart -
- Enhanced communication and signal link integrity features
- Fully adjustable shutoff points from 1/8 - 3/4 inch (3-19mm) accumulated rainfall
- Compatible with nearly all controllers
- Easy, versatile one-piece mounting requires no special tools
- Quick-Clip, gutter bracket included
- Visual sensor status and alert indicators verify consistent operation
- The signal strength indicator ensures correct installation, communication link, and signal integrity
Irritrol Wireless Rain Sensor Plus (RS1000)
$88.00$88.00Add to cart -
- To prevent water waste, built-in Quick Response® technology instantly shuts down irrigation as soon as it starts raining
- Instant Quick Response rain shutoff and freeze shutoff at 37°F
- Maintenance-free design with integrated battery for wireless models
- Adjustable vent ring allows for shorter or longer reset period
Hunter Wireless Rain-Clik (WR-CLIK) Rain/Freeze Combo Sensor Kit (WRCLIK)
$79.99$79.99Add to cart