No products in the cart.
-
- 2 in. (50/60) plastic industrial irrigation valve
- Durable glass-filled nylon construction with fabric-reinforced rubber diaphragm for long life and reliable performance
- Globe configuration
- Normally closed, forward flow design
- Slow closing to prevent water hammer and subsequent system damage
- Low flow capability for a wide range of applications
- One-piece solenoid design with captured plunger and spring for easy servicing; prevents loss of parts during field service
- Flow control handle adjusts water flows as needed
Rain Bird 200PESB – 2 in. Inlet Inline Plastic Industrial Irrigation Scrubber Valve (B35213)
$199.00$199.00Add to cart -
- 1 in. (26/34) Brass Valve
- Normally closed, reverse flow design ensures the valve will fail in the closed position if a tear or rip in the diaphragm occurs
- Prevents flooding, water waste, and landscape damage
- Slow closing to prevent water hammer and subsequent system damage.
- One-piece solenoid design with captured plunger and spring for easy servicing
- Prevents loss of parts during field service
- Flow control handle adjusts water flow as needed
- Manual internal bleed operates the valve without allowing water into the valve box
- Allows pressure regulator adjustment without turning on the controller
Rain Bird 100EFBCP – 1 in. Brass Irrigation Valve (B32553)
$199.00$199.00Add to cart -
Looking for a rugged waterproof controller ideal for remote or isolated installations. Toro's DDCWP Series controller provides all that and more. The DDCWP is battery-operated using two 9 V batteries and controls up to 8 potted DC latching solenoids.-
Zones: 2 (DDCWP-2-9V)
-
Application: Residential
-
Power Source: 9V Battery Operated
Toro DDCWP 2 Station 9V Battery Operated Controller (DDCWP-2-9V)
$199.00$199.00Add to cart -
-
- Easy-to-install add-on to any standard irrigation system that provides over 40% water savings by optimizing water at the root zone
- Turns any controller into a smart controller
- Displays soil moisture level, temperature, EC, and watering history
- Self-calibrating to all soil types and conditions
- High-grade 304 stainless steel sensor for extreme durability and corrosion resistance
- Rugged case designed for years of trouble-free service
- Sensor bypass permits normal irrigation cycles
- No maintenance sensor never needs calibration; just bury and forget
- Digital TDT Sensor enables highly accurate soil moisture readings that are independent of soil temperature and electrical conductivity
Rain Bird SMRT-Y Soil Moisture Sensor Kit (SMRTY)
$199.00$199.00Add to cart -
- 2 in. (50/60) chlorine-resistant valve for reclaimed water irrigation applications
- Plastic diaphragm and scrubber components molded of chlorine- and chemical-resistant plastic material
- Durable glass-filled nylon construction for long life and heavy-duty performance at 200 psi (13,80 bars) pressure
- Stainless steel studs molded into the body. Bonnet can be attached and removed easily without damaging threads
- One-piece solenoid design with captured plunger and spring for easy servicing; prevents loss of parts during field service
- External bleed protects the solenoid ports from debris when system is flushed
- Purple flow control handle standard on PESB-R Series valves
Rain Bird 200PESBR – 2 in. Inlet Inline Plastic Industrial Irrigation Valve (For Reclaimed Water) (B37400)
$197.00$197.00Add to cart -
The Hunter NODE battery controller for isolated sites and power-restricted areas. The Hunter NODE mounts to a valve's solenoid quickly and easily, and without screws, drills, or additional wires. The unit's solid construction and fully waterproof exterior ensure it can handle the harsh environment of any valve box. The Hunter NODE is powered by one or two 9V alkaline batteries and provides standard or extended power throughout the season. Along with exceptional reliability, the Hunter NODE features an easy-to-program LCD screen, the ability to control a Pump Master Valve, and is faster to program with Hunter NODE's simple wizard with 3 programs and 4 start times per program. The array of programming options and rugged reliability make the NODE a compact, but powerful irrigation controller with the flexibility of battery or solar power.
Hunter NODE 6 Station Battery Controller (NODE-600)
$197.00$197.00Add to cart -
Let Add-A-Zone solve your irrigation problems! Two valves connected to an Add-A-Zone are independently timed and activated from the controller for both manual and automatic operation. Each valve can be assigned to separate watering schedules and programs in the controller.The Source, RCO ADD-A-ZONE Single-Wire Dual-Zone Control (RCO860009)
$196.88$196.88Add to cart -
- Offers wireless Bluetooth control from up to 50' away (line-of-sight)
- Manage an unlimited number of controllers with one smartphone
- A fully waterproof enclosure seal protects against water ingress
- Active station LEDs and battery-life LED indicator for battery replacement
- 3 programs with 8 start times each and run times from 1 second to 12 hours
- Suspend irrigation for up to 99 days during the off-season
- Manual push-button operation, for quick operation without a smartphone
- Add a soil moisture sensor for compliance with LEED projects and agricultural applications
- Cycle and Soak feature prevents water waste and runoff in areas with elevation changes or tight soils
- Monthly and global seasonal adjustments for quicker schedule adjustments without changing run times
Hunter NODE-BT 4 Station Bluetooth Battery Controller (NODE-BT-400)
$194.00$194.00Add to cart -
- All bi-coders are fully sealed, submersion-proof, and approved for direct bury
- Shock resistant
- Freeze/heat resistant -4 to 140 degrees F
- Manufactured with 24 inches of 16 ga PVC jacketed solid core wire to connect to the two-wire and 24-inch of 18 ga PVC jacketed stranded core wire to connect to the valve wire
- Includes a built-in amperage meter that accurately measures and diagnoses valve solenoid electrical problems such as: "no current," "station short," or "over current"
- Multi-station bi-coders have color-coded wires for each station
- All bi-coders have built-in LEDs that blink during communications on the two-wire side and remain lit when power is supplied to the valve
- Run up to two typical solenoids up to 150 ft away from valve decoder using standard 14 ga irrigation wire per station wire (excluding BL-5201)
BaseLine BL-5201 Direct Burial 1-Station Bicoder Valve for Flow Sensors (BL5201)
$193.00$193.00Add to cart -
Fully charged out of the box, the Solar Panel Kit offers easy installation and a durable design for worry-free, long-term performance. It can also convert temporary irrigation projects into permanent systems, which ensures limited maintenance support for years to come.- Maintenance-free operation eliminates the need for annual battery replacement
- The ball-mount installation provides flexible mounting options for a variety of applications
- Includes 40" of UL-rated wire for outdoor sunlight exposure
- Maximum wire distance from charging cell: 200' 18 AWG750 mAh charging cell
Hunter SPNODE-BT Solar Panel Kit for NODE-BT Controllers (SPNODEBT)
$192.99$192.99Add to cart -
- Simply plug in the WAND Wi-Fi module to maximize water savings by converting to Hydrawise X2 smart control (Required for Wi-Fi access / Hydrawise app)
- Easy-to-read backlit display provides optimal visibility in any light
- 3 flexible programs with 4 start times each and run times of up to 6 hours
- Built-in QuickCheck technology provides simple diagnostics of faulty field wiring
- Hide Programs option shows 1 program and 1 start time for ease of use
- Easily suspend irrigation for up to 99 days during the off-season
- Short-circuit protection detects wiring faults and skips the station without damaging the system
- Easy Retrieve memory automatically backs up the full irrigation schedule in the event of a power outage
- Delay Between Stations for slow-closing valves or pump recharge
- Cycle and Soak prevent wasteful runoff in areas with elevation changes or compact soils
Hunter X2 14 Zone Indoor/Outdoor Wi-Fi Capable Controller (X21400)
$192.00$192.00Add to cart -
• Decoder station sizes available: 1, 2, 4, 6 Max distance to decoder,14 AWG wire path: 10,000 ft. Sensor decoder available with Flow and Click inputs • Max distance to decoder, 12 AWG wire path: 15,000 ft. Max recommended distance, decoder to solenoid: 150 ft. Field programmable decoders • ICD-HP wireless handheld programmer compatible Two-way communications Surge suppression: Internal (ground wire included) • Dual pump/master valve outputs may be assigned to decoders Wire path connectors included with each decoder Number of wire paths: 6 • Automatic daily weather-based scheduling with optional Hunter Solar Sync sensorHunter ICD-200 2 Station Decoder Module for ACC/ACC2 (ICD200)
$192.00$192.00Add to cart -
*Latest model with Two Sensor Inputs - Backed by the latest cloud technology, the Hydrawise HPC-400 outdoor irrigation controller from Hunter Industries waters your landscape only when it’s needed — and never when it’s not! The modular base model is expandable up to 16 stations. Perfect for residential and light commercial irrigation systems in any environment, the HPC provides ultimate water savings and remote irrigation management capabilities from your smartphone, tablet, or the web. It also sends instant alerts for needed maintenance. Experience the difference of Hydrawise smart watering today!
- Save up to 50% on your water bill!
- Automatically adjusts irrigation schedules based on local weather data to provide maximum water savings and healthy, beautiful landscapes
- Manage irrigation from your smartphone, tablet, or the web
- Full programming at the controller interface or via the Hydrawise app
- The 4-station base model is expandable up to 16 stations, with one sensor port to enable additional water savings
- Ideal for residential and light commercial applications
- Power source type: Electric
Hunter Hydrawise HPC-400 Wi-Fi Indoor/Outdoor Controller (HPC400)
$191.00$191.00Add to cart -
With the ICC2 Retrofit Kit (ICC-FPUP-2), ICC owners can upgrade older installations to next-generation control in a matter of seconds.Each retrofit kit contains a new:- FacePack
- Ribbon Cable
- 16in Ribbon Cable (for pedestals)
- Power Module
- Quick Start Guide
Hunter ICC2 ICCFPUP2 Front Panel Upgrade Kit (ICC-FPUP2)
$189.69$189.69Add to cart -
- With a lightning rating exceeding 20,000 volts, the new 220 Series brass valves offer nearly three times the lightning protection of competitive products
- Compact EZReg® dial-design technology (factory or field installed - no need to remove solenoid).
- With its 20,000-volt lightning rating, the industry's highest, the Spike Guard™ solenoid has virtually eliminated the need for solenoid replacement in high lightning environments. And with 1/2 the amperage draw of traditional solenoids you can run twice as many sprinklers simultaneously, reduce the cost of wiring during initial installation, or increase the distance from controller to sprinkler.
- Ensures the P-220 can operate at pressures up to 220 psi (15 Bar).
- Compact EZReg® dial-design technology (factory or field installed - no need to remove solenoid).
- Keeps valve box dry and easy to use.
- Simple verification of downstream pressure.
Toro P220 1 1/2 in. Valve with EZReg (P220-27-06)
$189.00$189.00Add to cart -
- External and internal manual bleed allows quick and easy at valve activation
- Double-beaded diaphragm seal design for superior leak-free performance
- Fabric-reinforced EPDM diaphragm and EPDM seat ensure superior performance in all water conditions
- Captive bonnet bolts provide hassle-free valve maintenance
- Low flow capability allows for the use of Hunter's micro irrigation products
- Accu-Sync pressure regulation
- Optional reclaimed water ID handle
- Globe valve without flow control
Hunter IBV-101-GFS 1 in. Brass Valve w/ Flow Control and Filter Sentry (IBV101GFS)
$189.00$189.00Add to cart