No products in the cart.
-
- Climate Logic compatible - Automatically reschedules Rain Dial-R, Total Control-R, and KwikDial watering based on the weather
- SMRT Logic® compatible - Provide remote control from any internet-connected device
- Clear/erase memory by program - Saves time by quickly erasing only the program's desired
- Water well recovery (delay between stations) - Option of pump circuit ON or OFF
- Water Budgeting - For quick changes to the watering durations of all stations on a program at one time or pre-set a change in the water budget for each month.
- Three water day choices - Any day of the week, skip Days, or Odd/even dates. Skip Days and Odd/even dates have a day exclusion option
- Three independent programs - Allows differing watering days, start times, station run times, and station assignments
- Test All Stations program - Allows a quick test of all stations from lowest to highest number
- Master Valve/Pump Start circuit assignable per station - Stations requiring a booster pump can be supplied while other stations can run on street water pressure
- Program stack or overlap option - Allows three programs/stations on at once or restricts operations to no overlapping station runs
- RainSensor™ ready - Sensor bypass switch and terminal for sensor hookup
- Remote control ready - Compatible with CRR (Contractor Residential Remote) remote series
- 365-day calendar for Odd/Even date watering -Meets the odd/even date watering mandates often used for landscape water reductions
Irritrol Rain Master Twice 2-Wire Lightning Arrestor (TW-LA-1)
$167.99$167.99Add to cart -
Rain Bird Field Decoders provide easy, cost-effective installation and expansion for SiteControl Decoder or ESP-LXD Decoder Central Control Systems. Decoders are installed out of sight to help protect them from the elements and vandalism.
- Operates one automatic irrigation valve
- Address pre-coded from the factory (no switches)
- Installed out of sight and protected from the elements and vandalism
- Enables advanced diagnostics and sensor features
- 0.5 mA standby current
- 40 V, 1.5 KW transit surge protection
- 14 ga 456 ft. cable
Rain Bird FD Series Field Decoder Signal Line Individual Valve (FD101TURF) (M13011)
$159.99$159.99Add to cart -
- Mounting columns are available with two different OD: small OD for the 4000 series and larger OD for the LEIT X series
- Galvanized steel
- Easy manage your irrigation systems
DIG MCOL4000 Mounting Column for LEIT 4000 Controller 32″ Galvanized Steel Pole (MCOL4000)
$159.00$159.00Add to cart -
Brand: ET Water Systems Part Number: ETWHCRB6CO HermitCrab host cable for Rain Bird® host controller (uses 5 pin remote connector) Series/Model: HermitCrab 2 With Flow AdapterETwater HermitCrab 2 Host Cable for Rain Bird Controller 5 Pin Remote Connector (ETW-HC-RB6-CO)
$149.99$149.99Add to cart -
Brand: ET Water Systems Part Number: ETWHCHCO HermitCrab host cable for Hunter® host controller (uses 3-wire remote connector) Series/Model: HermitCrab 2 With Flow Adapter
ETwater HermitCrab 2 Host Cable for Hunter Controller 3 Wire Remote Connector (ETW-HC-H-CO)
$149.99$149.99Add to cart -
- Two-wire decoder system for I-Core controllers
- Dual-S external surge protection module
- Decoder module displays decoder operation and diagnostic information
- Can operate up to 48 stations of combined decoder and conventional control making system retrofit easy
- Water proof connectors for connection to two wire path included with all decoders and dual-S surge protection
- Solenoid finder feature assists in locating valves in the field
Hunter DUAL-1 1-Station Decoder Module for I-Core (DUAL1)
$149.00$149.00Add to cart -
- Line surge protector for use with Rain Bird 2-wire decoder systems
- Required every 500 feet along a 2-wire path
- Not necessary with FD-401TURF or FD-601TURF which include built-in surge protection
Rain Bird LSP1TURF Line Surge Protection (M13008)
$139.00$139.00Add to cart -
• Decoder station sizes available: 1, 2, 4, 6 Max distance to decoder,14 AWG wire path: 10,000 ft. Sensor decoder available with Flow and Click inputs • Max distance to decoder, 12 AWG wire path: 15,000 ft. Max recommended distance, decoder to solenoid: 150 ft. Field programmable decoders • ICD-HP wireless handheld programmer compatible Two-way communications Surge suppression: Internal (ground wire included) • Dual pump/master valve outputs may be assigned to decoders Wire path connectors included with each decoder Number of wire paths: 6 • Automatic daily weather-based scheduling with optional Hunter Solar Sync sensorHunter ICD-100 1 Station Decoder Module for ACC/ACC2 (ICD100)
$139.00$139.00Add to cart -
Shop for Hunter Solar Panel Kit, 3" x 5/8" x 3-1/4" SPXCH Series
- Solar Panel Kit for XC Hybrid Controller
- Includes: Solar Panel, 40 feet of wire, and charging unit
- Add-On Accessory
Hunter 3″ SPXCH Solar Panel Kit for XC Hybrid Battery Controllers (SPXCH)
$137.99$137.99Add to cart -
The Solar Panel eliminates the need for batteries and provides maintenance-free operation by harnessing the sun's energy or ambient light to fully power the controller 24 hours a day, 7 days a week, for years on end. This "eco-innovations" alternative is more environmentally friendly and saves on battery costs.Hunter Solar Panel Panel Kit for NODE Controller (SPNODE)
$132.99$132.99Add to cart -
The Tucor Decoders are the original and the best 2-wire Decoder on the market today. The Tucor LD Decoder is a tried and tested device that has been reliably used on many sites for over 20 years. The Tucor LD Decoder is a flexible, universal way to interface and control most of the 24 Volt Solenoids on the market today.- Tucor Sensor Decoders can be used to interface many different types of sensors with the 2-wire path eliminating the need for dedicated sensor cable runs
- Valves can be placed within 400 ft. of a large Decoder connected via regular #14 gauge irrigation wire
- Easy manage your irrigation systems
Tucor LD-050 Flowmaster LD 2-Wire Decoder for One Address and One Valve Includes SP-100 (LD-050)
$131.00$131.00Add to cart -
- Browser-based programming and communication software
- Highly secure cloud access
- Map-based navigation and status
- Instant remote control from mobile device
- Flow monitoring and reporting
- Alarm reporting and detailed irrigation history reports
- Responsive web design configures for your device, allowing the same controls from your smartphone, tablet, or desktop
- Wi-Fi, Ethernet, or LTE connectivity options
- Built-in Solar Sync logic/Solar Sync Delay features for smart water savings
- Professional crew member administration with multiple levels of access
- Organize maintenance teams and their controllers into management groups
Hunter WIFI-KIT Wi-Fi Communication Module for ICC2 Centralus Controllers (WIFIKIT)
$129.99$129.99Add to cart -
- Pole mounting bracket for XCHSPOLE
- Mount XC Hybrid Stainless Steel Controller to Pole
Hunter XC Hybrid Controller Mounting Bracket and Hardware Only (XCHSPB)
$129.99$129.99Add to cart -
TUCOR’S Hybrid 3D is a simple, innovative and inexpensive conversion system.- Add multiple valves to your existing system with wires already in place
- Convert your conventional controller to a Tucor 2-Wire decoder system.
- Add a Master Valve and Flow Meter to your system on top of your existing valves’ common and control wires.
Tucor 3DLD-050 LD 2-Wire Decoder for Hybrid 3D Station/MV Control (3DLD-050)
$127.00$127.00Add to cart -
THE RKD is a decoder-based, 2-wire controller supporting 1-100 Stations (valves). The RKD uses the RKLD-050 decoder to energize valves in the field. The RKLD-050 is easily programmed by the user with a specific Station ID, then is connected anywhere along the 2-wire path. Enabling that Station then turns on the valve. The decoder can energize almost any 24 VAC solenoid on the market and can be reprogrammed with a different ID when desired.- Lead length: 11 in.
- The RKD uses the RKLD-050 programmable line decoder, which can be addressed and tested at the controller
- Easy manage your irrigation systems
Tucor RKLD-050 Wired Valve Line 2-Wire Decoder (RKLD-050)
$127.00$127.00Add to cart -
- Two-wire decoder system for I-Core controllers
- Dual-S external surge protection module
- Decoder module displays decoder operation and diagnostic information
- Can operate up to 48 stations of combined decoder and conventional control making system retrofit easy
- Water proof connectors for connection to two wire path included with all decoders and dual-S surge protection
- Solenoid finder feature assists in locating valves in the field
Hunter DUALS Surge Arrestor Decoder Module for I-Core (DUALS)
$115.00$115.00Add to cart