No products in the cart.
-
EZDT wireless, handheld battery-operated diagnostic tool for EZ Decoder Systems. Simplify the maintenance of EZ Decoder Systems with the handheld, wireless EZ Decoder diagnostic tool. Innovative wireless communication from the EZ-DT to EZ-1 decoders permits fault detection in the field without removing the decoders from the two-wire path. This provides flexible options for programming decoders before installation or reprogramming existing decoders in the area.
Hunter EZ-DT EZ Decoder System Wireless Diagnostic Tool (EZDT)
$279.00$279.00Add to cart -
- All bi-coders are fully sealed, submersion-proof, and approved for direct bury
- Shock resistant
- Freeze/heat resistant -4 to 140 degrees F
- Manufactured with 24 inches of 16 ga PVC jacketed solid core wire to connect to the two-wire and 24-inch of 18 ga PVC jacketed stranded core wire to connect to the valve wire
- Includes a built-in amperage meter that accurately measures and diagnoses valve solenoid electrical problems such as: "no current," "station short," or "over current"
- Multi-station bi-coders have color-coded wires for each station
- All bi-coders have built-in LEDs that blink during communications on the two-wire side and remain lit when power is supplied to the valve
- Run up to two typical solenoids up to 150 ft away from valve decoder using standard 14 ga irrigation wire per station wire (excluding BL-5201)
BaseLine BL-5202 Direct Burial 2-Station Bicoder Valve for Flow Sensors (BL5202)
$273.00$273.00Add to cart -
- Compatible with HCC and ICC2 Controllers: Up to 54 stations, plus master valve
- Plug-in Module allows hybrid operations of conventional and decoder stations
- Compatible with any direct-burial wire for maximum flexibility
Hunter EZ-DM Output Module for HCC and ICC2 Controllers, Up to 54 station (EZDM)
$265.00$265.00Add to cart -
SmartWire is the industry’s first simple-to-install 2-wire system. It requires no training and is cost-effective for commercial jobs in 16 zones and higher. SmartWire provides a reduction in material (copper wire) and labor costs; simplicity of wiring, programming, and troubleshooting; and ease of system expansion when adding zones. It converts any SL1600 SmartLine controller into a 16, 24, or 48-zone 2-wire controller. True two-way communication provides specific diagnostics, so you don’t have to spend hours searching for a problem.- LED display and status lights for programming, operation status, and troubleshooting with error codes
- Programs and operates SmartWire SLDEC Series decoders
- Connections for up to 3 different 2-Wire paths for maximum installation flexibility
Weathermatic SLDEC2 2-Zone Decoder with Surge Protection (SLDEC2)
$256.99$256.99Add to cart -
WeatherTRAK H2O 2-Wire single station valve decoder. Includes four 3MTM DBR/Y-6 splice kits.- Easy to install
- Durable
- Easy manage your irrigation systems
Hydro Point Data Systems WeatherTRAK WT2W-H2O-1VD 2-Wire 1 Station H2O Valve Decoder (WTPWT2WH201VD)
$249.99$249.99Add to cart -
The Hunter 3 Input Flow Expansion Module (A2CF3) Wall Mount Front-Entry is designed for large irrigation systems. Made from a premium-grade material, this replacement panel offers lasting durability. It features a large backlit LCD for hassle-free monitoring and control. The controller can support up to 32 automatic programs for easy plant management.Hunter A2C-F3 3-Input Flow Meter Expansion Module for ACC2 Controller (A2CF3)
$249.88$249.88Add to cart -
- Two-wire decoder system for I-Core controllers
- Dual-S external surge protection module
- Decoder module displays decoder operation and diagnostic information
- Can operate up to 48 stations of combined decoder and conventional control making system retrofit easy
- Water proof connectors for connection to two wire path included with all decoders and dual-S surge protection
- Solenoid finder feature assists in locating valves in the field
Hunter DUAL-2 2-Station Decoder Module for I-Core (DUAL2)
$249.00$249.00Add to cart -
- Mounting columns are available with two different OD: small OD for the 4000 series and larger OD for the LEIT X series
- Galvanized steel
- Easily manage your irrigation system
DIG MCOLXS Mounting Column for LEIT X Controller 35″ Galvanized Steel Pole (MCOLXS)
$244.00$244.00Add to cart -
- A2CWIFI Internal Wi-Fi Module for ACC2
- This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules
- ACC2 (not included)
Hunter ACC2 A2C-WIFI Internal Wi-Fi Module (A2CWIFI)
$229.99$229.99Add to cart -
PCDMKIT - Upgrade Kit for EZ Decoder Output Module Kit Includes:- (1) PC-DM Decoder Output Module for use with EZ-1 decoders
- (1) New Replacement Faceplate for the Pro-C to allow the 32 stations
Hunter PC-DM-KIT Upgrade Kit for EZ Decoder Output Module for Pro-C (PC-DM-KIT)
$199.99$199.99Add to cart -
Let Add-A-Zone solve your irrigation problems! Two valves connected to an Add-A-Zone are independently timed and activated from the controller for both manual and automatic operation. Each valve can be assigned to separate watering schedules and programs in the controller.The Source, RCO ADD-A-ZONE Single-Wire Dual-Zone Control (RCO860009)
$196.88$196.88Add to cart -
- All bi-coders are fully sealed, submersion-proof, and approved for direct bury
- Shock resistant
- Freeze/heat resistant -4 to 140 degrees F
- Manufactured with 24 inches of 16 ga PVC jacketed solid core wire to connect to the two-wire and 24-inch of 18 ga PVC jacketed stranded core wire to connect to the valve wire
- Includes a built-in amperage meter that accurately measures and diagnoses valve solenoid electrical problems such as: "no current," "station short," or "over current"
- Multi-station bi-coders have color-coded wires for each station
- All bi-coders have built-in LEDs that blink during communications on the two-wire side and remain lit when power is supplied to the valve
- Run up to two typical solenoids up to 150 ft away from valve decoder using standard 14 ga irrigation wire per station wire (excluding BL-5201)
BaseLine BL-5201 Direct Burial 1-Station Bicoder Valve for Flow Sensors (BL5201)
$193.00$193.00Add to cart -
Fully charged out of the box, the Solar Panel Kit offers easy installation and a durable design for worry-free, long-term performance. It can also convert temporary irrigation projects into permanent systems, which ensures limited maintenance support for years to come.- Maintenance-free operation eliminates the need for annual battery replacement
- The ball-mount installation provides flexible mounting options for a variety of applications
- Includes 40" of UL-rated wire for outdoor sunlight exposure
- Maximum wire distance from charging cell: 200' 18 AWG750 mAh charging cell
Hunter SPNODE-BT Solar Panel Kit for NODE-BT Controllers (SPNODEBT)
$192.99$192.99Add to cart -
• Decoder station sizes available: 1, 2, 4, 6 Max distance to decoder,14 AWG wire path: 10,000 ft. Sensor decoder available with Flow and Click inputs • Max distance to decoder, 12 AWG wire path: 15,000 ft. Max recommended distance, decoder to solenoid: 150 ft. Field programmable decoders • ICD-HP wireless handheld programmer compatible Two-way communications Surge suppression: Internal (ground wire included) • Dual pump/master valve outputs may be assigned to decoders Wire path connectors included with each decoder Number of wire paths: 6 • Automatic daily weather-based scheduling with optional Hunter Solar Sync sensorHunter ICD-200 2 Station Decoder Module for ACC/ACC2 (ICD200)
$192.00$192.00Add to cart -
- Grid design on top ensures light access to photovoltaic module
- Galvanized steel
- Weatherproof, rustproof and extremely durable
DIG MCOL4000L Mounting Column for LEIT 4000 Controller 48″ Galvanized Steel Pole (MCOL4000L)
$189.00$189.00Add to cart -
- Modular Pro-C: Conventional wiring from 4 to 23 stations, Hybrid EZ Decoder option up to 32 total stations (28 stations max. if two-wire only)
- Fixed PCC with 6- and 12-station options
- 1 sensor input available for use with Solar Sync or any Clik sensors
Hunter Pro-C PCDM EZ Decoder Output Module (PC-DM)
$175.00$175.00Add to cart