No products in the cart.
-
- The ESP-LXD controller can manage up to 50 stations but can easily be expanded for use with up to 200 stations
- Supported decoders: FD-101TURF, FD-102TURF, FD-202TURF, FD-401TURF, FD-601TURF
- Uses the same decoder hardware as MDC, MDC2, and SiteControl
Rain Bird ESP-LXD 50-Station Outdoor Decoder Controller (F43100)
$1,449.00$1,449.00Add to cart -
The Soil Moisture Sensor Decoder, model CS-2W-MOIST, measures the volumetric water content, temperature, and electrical conductivity of the soil. It also operates a single valve, eliminating the need for an additional Station Decoder.
Calsense CS3000 Soil Moisture Sensor Decoder (CS-2W-MOIST)
$1,449.00$1,449.00Add to cart -
Rain Bird Field Decoders provide easy, cost-effective installation and expansion for SiteControl Decoder or ESP-LXD Decoder Central Control Systems. Decoders are installed out of sight to help protect them from the elements and vandalism.
- Operates one automatic irrigation valve
- Address pre-coded from the factory (no switches)
- Installed out of sight and protected from the elements and vandalism
- Enables advanced diagnostics and sensor features
- 0.5 mA standby current
- 40 V, 1.5 KW transit surge protection
- 14 ga 456 ft. cable
Rain Bird FD-601 6-Addresses 2-Wire Signal Line Field Decoder (FD601TURF) (M13007)
$890.00$890.00Add to cart -
Wired 2 Wire Flow Sensor Decoder (WT2W-FSD)Hydro Point Data Systems WeatherTRAK Wired 2 Wire Flow Sensor Decoder (WT2W-FSD)
$749.99$749.99Add to cart -
The Calsense 2-Wire POC Decoder, model CS-2W-POC operates a single master valve and flow sensor. A single controller can operate up to four Calsense POC Decoders, with a maximum of 12 points of connection in a chain of Calsense controllers using FLOWSENSE® technology. It is recommended that all wire runs between valves and Calsense 2‐Wire Decoders be direct pulls and has no splices except at the Calsense Decoder location.Calsense CS3000 POC Decoder Module (CS-2W-POC)
$619.00$619.00Add to cart -
Rain Bird Field Decoders provide easy, cost-effective installation and expansion for SiteControl Decoder or ESP-LXD Decoder Central Control Systems. Decoders are installed out of sight to help protect them from the elements and vandalism.
- Operates one automatic irrigation valve
- Address pre-coded from the factory (no switches)
- Installed out of sight and protected from the elements and vandalism
- Enables advanced diagnostics and sensor features
- 0.5 mA standby current
- 40 V, 1.5 KW transit surge protection
- 14 ga 456 ft. cable
Rain Bird FD-401 4-Addresses 2-Wire Signal Line Field Decoder (FD401TURF) (M13006)
$590.00$590.00Add to cart -
The Calsense 2-Wire 2‐Station Decoder, model CS-2W-2ST, operates up to 2‐solenoids using uniquely colored wires for each station. A single controller can operate up to 128 2‐wire stations, spread across a maximum of 70 physical Calsense 2‐Station Decoders. It is recommended that all wire runs between valves and Calsense 2‐Wire Decoders be direct pulls and have no splices, except at the Calsense 2-Wire Decoder location.Calsense CS3000 2-Wire 2 Station Decoder (CS-2W-2ST)
$579.00$579.00Add to cart -
Flow biCoders™ ensure compatibility between virtually any third-party flow device and any Baseline controller, so retrofitting an existing site to a Baseline system is easy. Baseline controllers are equipped with powerful flow management and monitoring software to quickly react to high and low flow situations, isolate faulty zones, and protect your site from unexpected flow problems.BaseLine BL-5308 Standard Flow Sensor Meter Bicoder (BL-5308)
$429.99$429.99Add to cart -
IVM-SEN • Interfaces with LX-IVM to control weather sensors or flow sensorsRain Bird LXIVMSEN IVM-SEN 2-Wire Sensor Device (F47110)
$428.88$428.88Add to cart -
• Decoder station sizes available: 1, 2, 4, 6 Max distance to decoder,14 AWG wire path: 10,000 ft. Sensor decoder available with Flow and Click inputs • Max distance to decoder, 12 AWG wire path: 15,000 ft. Max recommended distance, decoder to solenoid: 150 ft. Field programmable decoders • ICD-HP wireless handheld programmer compatible Two-way communications Surge suppression: Internal (ground wire included) • Dual pump/master valve outputs may be assigned to decoders Wire path connectors included with each decoder Number of wire paths: 6 • Automatic daily weather-based scheduling with optional Hunter Solar Sync sensorHunter ICD-600 6 Station Decoder Module for ACC/ACC2 (ICD600)
$397.00$397.00Add to cart -
- All bi-coders are fully sealed, submersion-proof, and approved for direct bury
- Shock resistant
- Freeze/heat resistant -4 to 140 degrees F
- Manufactured with 24 inches of 16 ga PVC jacketed solid core wire to connect to the two-wire and 24-inch of 18 ga PVC jacketed stranded core wire to connect to the valve wire
- Includes a built-in amperage meter that accurately measures and diagnoses valve solenoid electrical problems such as: "no current," "station short," or "over current"
- Multi-station bi-coders have color-coded wires for each station
- All bi-coders have built-in LEDs that blink during communications on the two-wire side and remain lit when power is supplied to the valve
- Run up to two typical solenoids up to 150 ft away from valve decoder using standard 14 ga irrigation wire per station wire (excluding BL-5201)
BaseLine BL-5204 Direct Burial 4-Station Bicoder Valve for Flow Sensors (BL5204)
$389.99$389.99Add to cart -
- Sensor decoder available with flow and clik inputs
- 150 ft maximum recommended distance, decoder to the solenoid
- Two-way communications
- Surge suppression, internal ground wire included
- Dual P and MV outputs may be assigned to decoders
- Wire path connectors included with each decoder
Hunter ICD-SEN Sensor Decoder Module for ACC/ACC2 (ICDSEN)
$375.00$375.00Add to cart -
Rain Bird Field Decoders provide easy, cost-effective installation and expansion for SiteControl Decoder or ESP-LXD Decoder Central Control Systems. Decoders are installed out of sight to help protect them from the elements and vandalism.
- Operates one automatic irrigation valve
- Address pre-coded from the factory (no switches)
- Installed out of sight and protected from the elements and vandalism
- Enables advanced diagnostics and sensor features
- 0.5 mA standby current
- 40 V, 1.5 KW transit surge protection
- 14 ga 456 ft. cable
Rain Bird FD-202 2-Addresses, 2-Solenoid 2-Wire Signal Line Field Decoder (FD202TURF) (M13005)
$350.00$350.00Add to cart -
• Decoder station sizes available: 1, 2, 4, 6 Max distance to decoder,14 AWG wire path: 10,000 ft. Sensor decoder available with Flow and Click inputs • Max distance to decoder, 12 AWG wire path: 15,000 ft. Max recommended distance, decoder to solenoid: 150 ft. Field programmable decoders • ICD-HP wireless handheld programmer compatible Two-way communications Surge suppression: Internal (ground wire included) • Dual pump/master valve outputs may be assigned to decoders Wire path connectors included with each decoder Number of wire paths: 6 • Automatic daily weather-based scheduling with optional Hunter Solar Sync sensorHunter ICD-400 4 Station Decoder Module for ACC/ACC2 (ICD400)
$320.00$320.00Add to cart -
- All bi-coders are fully sealed, submersion-proof, and approved for direct bury
- Shock resistant
- Freeze/heat resistant -4 to 140 degrees F
- Manufactured with 24 inches of 16 ga PVC jacketed solid core wire to connect to the two-wire and 24-inch of 18 ga PVC jacketed stranded core wire to connect to the valve wire
- Includes a built-in amperage meter that accurately measures and diagnoses valve solenoid electrical problems such as: "no current," "station short," or "over current"
- Multi-station bi-coders have color-coded wires for each station
- All bi-coders have built-in LEDs that blink during communications on the two-wire side and remain lit when power is supplied to the valve
- Run up to two typical solenoids up to 150 ft away from valve decoder using standard 14 ga irrigation wire per station wire (excluding BL-5201)
BaseLine BL-5202 Direct Burial 2-Station Bicoder Valve for Flow Sensors (BL5202)
$273.00$273.00Add to cart -
- Compatible with HCC and ICC2 Controllers: Up to 54 stations, plus master valve
- Plug-in Module allows hybrid operations of conventional and decoder stations
- Compatible with any direct-burial wire for maximum flexibility
Hunter EZ-DM Output Module for HCC and ICC2 Controllers, Up to 54 station (EZDM)
$265.00$265.00Add to cart